Downloads
Spec Sheet: Download
Specifications and Features:
• 8' to 14' mounting heights
• Triangular 3-bolt base with spun aluminum collar
• Luminaires are slipfitted on pole top
Structural Base
All aluminum alloys comply with metallurgical and mechanical properties set forth in the Aluminum Association Standards.
The Shaft
The shaft is extruded new seamless 6061 alloy aluminum and heat treated to producea T6 temper. The shaft may be drilled for mounting luminaires. All shafts are polished with fine-grit aluminum oxide cloths, resulting in a high-quality, circumferential satin-brushed finish. After finishing each standard, it,ach standard is wrapped for protection in shipment.
Anchor Base
The anchor base is cast from A356 alloy aluminum and heat treated to a T6 temper. The shaft is inserted into the anchor base. The anchor base casting and shaft are joined by a continuous circumferential weld at the outside tip and inside bottom of the anchor base.
Wire Access
A 11⁄2" diameter wire access hole is incorporated in the anchor base casting and completely concealed by the spun aluminum collar. NEC compliant handhole is provided, flush covered, and centered 18" above the bottom of the standard.