Downloads
Spec Sheet:  Download
Photometric File:  Download
 
LED Luminaire Pole Sets are preconfigured FIXTURE + POLE components in popular combinations that are made available with a simple catalog number. These LED Post Top Luminaire and Pole are available with 10FT 3” Diameter Anchor Based OR Direct Buried Pole configured that contain highly specified characteristics and when ordered as an LED Luminaire Pole Set are a greater value. Different configurations are available by ordering the standard product.

Specifications
Housings: Cast aluminum decorative capital with 3” Slip Fit
Finish: Super Durable Polyester Black Powder Coat Finish.
Lens: Frosted Acrylic Lenses
Distribution: Type V Non-cutoff
LED Lamp Socket & Cord: Medium E26 white porcelain socket with mounting bracket, pre-wired 18/3 SVT cord with Leads. 120V or 277V. Fixture rated 150W MAX
LED Lamps: Available to order as Field Installed Accessory
Listings & Ratings: ETL Listed to UL 1598 Standard for Wet Location.
Warranty: 5 Year Limited Warranty on fixture. Lamps per Lamp Manufacturer

Pole Specifications and Features
Shaft: The shaft is extruded 3” diameter, 0.125" wall, 10FT above grade, 6061 T6
alloy aluminum The shaft acts as tenon for fixture mounting at the top.
Anchor Base (10AB Option): The anchor base is cast from A356 T6 alloy aluminum welded to the shaft on top outside and bottom inside of casting.
Direct Embedment (10DB Option): The length of the embedded section of pole is 3’. A 1-1/2” diameter grommeted wire inlet hole located 1’- 6” below grade is included. Anti-rotation plate is provided.
Handhole: A code minimum handhole is provided at 18" above grade with ground lug.
Finish: Super Durable Polyester Black Powder Coat Finish.